Materials: We use only the finest lumber we can find, a mix of Birch, Maple, and Pine. Our pieces are handmade, due to stain and paint differences the final product color may vary slightly than pictured, but guarantees each item will be unique! 

 What's Included?: Each piece includes mounting hardware & instructions; concealment cabinets also include a magnetic lock, foam.   

Optional Upgrades:

RFID Lock - Similar to a key you use at a hotel. 
Biometric Lock- Use your finger to unlock! Device can store up to 10 fingers. 

Colors- Our products are offered in a variety of colors for an upgrade. 

Want a special image or name engraved or painted on? We offer customized looks, but you must email us what you are looking to do before you place the order.  

Production & Shipping: As of 10/31/20 our production schedule is currently 1-2 Weeks. 
Orders of multiple size items will ship when all items are completed unless specified.
These time frames are estimates, and may increase or decrease due to assembly and order volume. 

 We Got You Protected wants you to be 100% satisfied with your purchase of any of our products. If at any time you experience a problem with any of your products purchased from us, please contact us at info@wegotyouprotected.com

Returns

We Got You Protected will replace any defective item reported within 7 days of delivery.

Any item damaged during shipping must be reported within 48 hours for a claim to be filed.

Refunds
Will be handled on a case-by-case basis. Please contact us. We strive to keep our customers happy and will work with you to make sure that you're satisfied with your purchase. Shipping charges will not be refunded.   

Below you will find instructions for cutting foam to fit your needs.

Step 1: Lay items you are wanting to store on foam and orient to your liking.

Step 2: Using a fine-tipped pen or the tip of an Exacto knife, trace around your items.  (Pay close attention when tracing items. The tighter you can trace to the item, the better your finished product will turn out.)

Step 3: Using a sharp knife, cut foam to the desired depth of your item you are wanting to store.

Step 4: Peel away layers of foam until the desired depth is reached.

Step 5:  Check fitment of items frequently to ensure proper fitment.

Additional material removal may be required around items such as scope turrets and bolt knobs to ensure proper fitment of your items. If you are looking for replacement foam email info@wegotyouprotected.com

Tools Needed

-#2 Philips bit

-Drill

-Level

-Second set of hands to assist with hanging

1. You will find the key and mounting instructions stapled on the back or packaged with the flag
2. Locate desired flag hanging position and locate stud inside of wall.
3. Locate mounting holes on top and bottom of flag. On mini and half flag models, holes are located inside of flag.  Remove foam insert to gain access to mounting holes.
4. Using the #2 Philips bit in drill and one of the supplied 3-inch screws secure top of unit to wall stud first. Use second set of hands to assist with holding while fastening screw.
5. Place level on top of flag and verify unit is hanging level.
6. While maintaining level positioning drive second supplied screw securing bottom of unit to the wall.   On large flag models use second set of mounting holes for securing.